How to Unlock and Save Coding to IC177

[Delon]

Hello guys, I am posting another guide on how to unlock IC177 without Seed Key Calculator and how to save the coding.
This also took me a few days to figure out as I tried a lot of different Seed Calculators to figure out the IC177 seed, but none of the Seed Calculators worked.
This worked on my CLA C118 (W118).
You will be able to disable the seat belt warnings in the IC177 and also code other features.

Password: autogmt.com

 

[cemel1]

Does this work on W213?

 

[Delon]

You will need to test it, try with different SMR-D files when you are unable to use Generic Jobs to unblock the firewall.
Also let us know if it worked afterwards.

 

[Meru]

Yes, it works well on W213, as well as W205 and W253.

 

[r2p]

Hello, can you tell me how to unlock IC213 and what SMR-D files do you use? I can‘t get the Security Access 3B in EZS213 and IC213. Thanks in advance.

 

[Meru]

Open the project that matches the model you need and then do everything according to the instructions as shown in the PDF. If you did not succeed before, most likely you have the wrong file.

 

[banne123]

I tried it but it didn't work. 3B security requires a seed key

 

[Sogaro]

I know there is a special EZS213 unlocked file that works well, maybe you can look for it.

 

[Den2]

Hello, can you tell me how to unlock IC213 and what SMR-D files do you use? I can‘t get the Security Access 3B in EZS213 and IC213. Thanks in advance.

I copied EZS213 from "С:\Program Files (x86)\Mercedes-Benz\Xentry\MB_PKW\SMRX" and then open 2 files in temporary project:
EZS213 and IC213.

Coded several W213 2020 year (with no ZenZefi).

Step 1: Connect to EZS213 and run the commands.
Session: Extended start
Generic Jobs Security: Access Level 3B
* - do not close connection with EZS
Step 2: Connected to IC213 and was able to change and save codes (don't forget to check the box in Monaco - variant coding - "editing" - "allow editing current coding string").