Link DAS to WIS or WIS Standalone

[ninjahwdp]

I hope my question is not obvious.
Is it possible to link DAS (Xentry 09/2023) to "Mercedes-Benz WIS ASRA Standalone v07.2021"?
I have successfully linked Xentry, but with DAS I always get the "XWSAPI.EXE" error even when I try to run WIS in the background.

 

[R00TR0w]

It is fully linked long time ago, as it was written here and not for fun:

Mercedes-Benz WIS ASRA Standalone v07.2021

The famous electronic guide with repair and maintenance information for Mercedes-Benz vehicles...

https://autogmt.com

If you have free activation, then you need to use the second file, it was written too.
If you have made any "smart" changes to the XENTRY system before/after installation, it may not work at all.
The question is over.

 

[kaliel]

I had the same problem, then I found a problem in the free activator, as it was written that it changes the contents of some files in Xentry, avoid this if you want to link WIS.
I overcame this problem by reinstalling Xentry, manually activating it using a free key generator, that's it (if you installed XPT you will also need an offline license in the right place), then install WIS.Standalone from R00TR0w and "update file", it should link the Xentry and DAS menus. Good luck.