VGSNAG2_VGS2_0101 Coding

[Mersovod]

I ask for help from anyone who has access to VeDoc or saved data. I need the coding of the VGS unit, the original was lost along with the board (no connection). Another one of exactly the same generation was installed. WDBTK75G25T035200 ( WDB2094751T035200 ). At the moment, the VGSNAG2_VGS2_0101 unit is installed
HW 033 545 7332, EHS 220 270 3106, SW 007 448 9510, coding XGGB. The problem is that there are errors in the connection of VGS with ME, KI and other units.

 

[GIN]

According to my data, the VGS data you selected is from a W221, so it can't match the data sent via CAN, since the W209 has neither ISM nor KI and uses different data. You can wait for someone to find the data based on the VIN, or you can try what I found. EHS 220 270 31 06, SW 0064486410.cff, coding XE6H.

 

[Mersovod]

I understand that this firmware does not fit the car, I found the right one, but I still need the correct coding option for the new firmware. Here is what should be, information from the DAS system.

0335457332;0084485710;VGSNAG2\0084485710_001.CFF;1;NAG2;BM=209.375|209.475|211.070|211.270|215.375|219.375|220.070|220.075|220.170|220.175|230.475,EHS_HW=2202701806;A39_N-PLATTE;

Help me, good people

 

[Mersovod]

0335457332;0064486410;NAG2\0064486410_001.CFF;1;NAG2;BM=209.356|209.456|211.056|211.256|219.356|219.357,Code_808=YES,EHS_HW=2202701806;A39_N-PLATTE;

Thank you. I looked at the XE6H match. Ratio 2.65, fits 209.356, 209.456, model CLK350.
I think XEW4 with SW 009 448 4310, EHS 220 270 2106 (was installed before 2007) can still work for 209.472 CLK500.
I would like to know what was in the original, under 209.475 CLK500 USA.

 

[GIN]

209.475 CLK 500, 09/09/2004, 113.968 30 620550, 722.901 00 069557.
I had a CLK500 convertible from the USA in my workshop with VGS3. EHS 220 270 31 06, SW 000 902 48 00, coding YE06.

YE06=79 65 30 36 01 00 00 00 00 00 03 03 03 03 00 02 00 00 01 00 03 02 00 00 00 00 C0 00 3B 00 5A 0A E8 03 E8 03 8A 07 C2 01 43 89
XE6H=78 65 36 68 01 00 00 00 00 00 03 03 03 03 00 02 00 00 01 00 03 02 00 00 00 00 C0 00 3B 00 5A 0A E8 03 E8 03 8A 07 C2 01 80 1C

As can be seen from the coding line, only the letter name and the line checksum differ.
We can extract coding lines in any VGS manager, Vediamo or DTS Monaco.

 

[Mersovod]

Thank you, dear GIN. The order of actions is more or less determined. You need to flash 0064486410 under the coding XE6H for VGS2_0101.

 

[Mersovod]

Firmware from XEW4 (009 448 4310) is suitable, but the coding is XE6H, with XEW4 there is a communication error with the engine!