2016 GLA45 AMG - Enable Android Auto

[skytan]

What is your VIN number?

 

[remlab]

Thank you. Well. I didn't get anything out of them. I ordered Tactrix Openport 2.0 and will install XENTRY PassThru. Hopefully I can get the NTG version from here and then use the ENET cable and DTS Monaco and flash the firmware if needed.

 

[remlab]

Here is my VIN number: WDDTG5CB4GJ268742

 

[skytan]

Flash 1769027702, 2469023004 with ENET, DOIP. Then try to unlock the coding with DTS Monaco.

 

[remlab]

Thank you, skytan. I have DTS Monaco. I think I need the file "HU5S1.smr-d" I can't find this file, so I guess I need to download the 100 GB project files to get it. I'm learning a lot.
I see that I can get SMR-D files from XENTRY.

 

[bogdandpr]

My friend, it is a complicated process to flash NTG5S2 units, especially if you do not have the knowledge and skills. You will need some kind of DOIP interface to be able to flash it, and it is a risky process. I suggest finding someone in your area who can help you with the update and subsequent coding.

 

[r2p]

You don't need to download this package for 1 file. Use SW Finder from this thread.

SW Finder v5.2

The SW Finder program will help you easily find the necessary firmware for Mercedes-Benz car...

https://autogmt.com

 

[remlab]

Yes, thank you. I got the firmware but I was referring to the "HU5S1.head unit" file. There are some good step by step tutorials on YouTube on how to do this, however they all seem to be for the DTS 8.xxx version, as opposed to the version available here which is DTS 9.xx.

 

[remlab]

My friend, it is a complicated process to flash NTG5S2 units, especially if you do not have the knowledge and skills. You will need some kind of DOIP interface to be able to flash it, and it is a risky process. I suggest finding someone in your area who can help you with the update and subsequent coding.

I understand. I spent most of the day trying to get DTS to work. Finally, I succeeded. It's version 9, and all the step-by-step instructions for the actions I needed to perform were for version 8.

 

[r2p]

With older units like NTG5, NTG 5.5 I had the best experience using DTS Monaco 8.14 with ENET cable. I advise you to first configure everything correctly and select static IPv4 in the network settings, then your DOIP device should be available in DTS Monaco 8. Then you can flash your HU5.