Add Smart 451 Special Functions for Power Users

[hjp]

Add Development Data & Development Data (inside control unit adaptation) SAM451.
Add Development Data & Extra Coding (inside control unit adaptation) ESP451.

 

[Qjuar]

Hi, do you know any information about TCU on 451?

 

[ExpatMat]

Here's some information about the Smart 451 TCU.

Mitsubishi G2T60x, 3 Hardware versions:

v1 451.300 + others, not 334 or 380.
v2 not 300, 334, 380.
v3 334 or 380 (Hardware changed for MHD).
TCU cloning possible on the same hardware version.
Not SCN.
Code using Vediamo or DTS.

Code options:

Auto or manual (Softouch).
Start Mode (Auto, Manual or Last mode used).
Paddle Shift Steering (hold up-shift for 2+ seconds, puts TCH in Auto mode).
Map Switching (On/Off). I'm not sure how this actually operates, the TCU has multiple maps.
Creep mode (like riding the clutch on a manual stick change) gearbox.

If anyone is interested, I can post a short guide on using Vediamo to code TCU variants.

Regards.
The above is based on what I believe to be true, but may not be 100% correct.