DTS and Vediamo Setup with VCX

[MCLAUDIO]

I came to check if there is any final solution.
Problems with VCX. I have installed several slave files available elsewhere. I even saw a video where a person has a small program setting up VCX and Vediamo.
But every time I need to configure it's a real pain and I can't find a real solution.
Any hints?

 

[julmari]

If you mean VCX as a C6/MTS6532 clone, check this and try:

DTS Monaco 8.16 XENTRY VCI MTS6532 CBF and SMR Support

I spent many hours trying to cope with the situation. Interfaces did not work in DTS 8.16 with a...

https://autogmt.com

For Vediamo, use version 04.02.02 with J2534 protocol. You will find the correct device name for Part J in the registry (or in the DTS settings).

 

[o_Rage_o]

Here are the slave files for Vediamo 4.02.02 and 5.01.01 for use with the VCX SE device.

VCX SE Setup Files for - Vediamo v04.02.02 and v05.01.01

Here is a working set of files for both Vediamo 4.02.02 and 5.01.01 for use with VCX SE. 0)...

https://autogmt.com

Hope this helps you!

 

[o_Rage_o]

I've created another thread on the DTS Monaco forum, also using the corresponding DTS Monaco slaves and installation files.

VCX SE Setup Files for DTS Monaco 8.16

Here are my current WORKING slave files that allow the system to work both with CBF and SMR-D...

https://autogmt.com

Hope this helps you set up both tools right now!