DTS Monaco 8.16 Does Not Want to Work with ZenZefi

[Alexei]

Xentry 06.2023 and DTS Monaco 8.16 with SDconnect.
Both systems work fine.
The system has an After-Sales STANDARD certificate installed.
How to configure DTS Monaco 8.16 to work with cars? DTS Monaco launches ZenZefi, but does not see the installed certificate.

 

[mercedesmods]

With After-Sales STANDARD certificate you cannot code W223. You need a special certificate for coding and you need to use DTS Monaco 9.

 

[Alexei]

Thanks for the info, it's not about coding W223, I have DTS Monaco 9 for that. Sometimes I want to read W223 with standard rights via DTS Monaco 8 and SDconnect, but for that I need to configure it. Somewhere on this forum they wrote that it can be done with additional files or modification.

 

[wojciech300]

To use DTS Monaco 8, you will need the corresponding ZenZefi client. In any case, coding with DTS Monaco 8 is also possible with a special certificate.

 

[Alexei]

DTS Monaco 8 installed with Xentry including ZenZefi client.
This installation works on another laptop with Xentry and DTS Monaco 9 without any issues even without running Xentry ZenZefi works with DTS Monaco 9.

 

[wojciech300]

Yes, DTS 8 needs its own client, it will not work with the Xentry or DTS 9 client.

 

[Alexei]

Will there be conflicts between two Xentry clients and an additionally installed client of a different version?

 

[AdamS]

As far as I have seen, different versions conflict with each other. DTS Monaco is probably trying to access Xentry certificates, which is another type of ZenZefi installation.

 

[Alexei]

I decided not to experiment and just installed the additional DTS 9, which works without problems with ZenZefi from Xentry.