Mod lane change flashes C118

[Snkfear]

I'm trying to change default number of flashes (3) to 5 with DTS Monaco without success.

As I've read, I should connect to the BCFMA2 ECU domain 13 (OLC VC Blinker Write) and change the default value on PBMM_ANZ_TB... but every time I try to code it I get an out of range (31) error.


I'm using the BCMFA2 smr-d file from Xentry v12.2023 and I've also tried older ones without success... can someone give me a hand and point me to the right direction?

Thank you in advance!

 

[Snappa]

Have you tried ESZ Authenticate before coding?

 

[myztic]

Tab Generic-services, unlock 3B access in EZS167.

 

[Snkfear]

Have you tried ESZ Authenticate before coding?

Of course, I tried using the EZS button on the project and also starting an extended session and unlocking EZS by hand.

Tab Generic-services, unlock 3B access in EZS167.

I've already tried it, I always get an out of range error.

 

[myztic]

BCMFA2 -> generic jobs -> security access level 37

 

[Snkfear]

I've already tried this, but it didn't work. It always ends with an out of range error (31).

 

[Mersovod]

Invalid value for parameter. Can't change it.

 

[Snkfear]

But others with the same car have changed it without issues... Maybe since mine is newer (February 2023) I need to modify other domain?

 

[karone]

Assuming that you have already:

1) Unlocked EZS via Button OR Via Generic Jobs (select all security levels)
2) Unlocked SAM BCFMA2 via Generic Jobs

Try to do the following step:

3) Under Sessions, Choose "Extended Session" if that does not work, choose "Programming Session"

If you have option to DL_EEEPROM_Schreiben or to Write EEPROM, do so after all coding changes.
Good Luck, let us know!