W213 Facelift 2023 Seems to Block XPT DOIP Connection

  •  XENTRY 
  • Thread starterPeteM123
  • Start date
Status
Not open for further replies.
P
PeteM123
New member
Joined
03.10.2024
Messages
20
Solutions
1
Reaction score
9
Can anyone confirm that the latest W213 models (facelift, after 2022) do not support Xentry connectivity?

I use XPT 03.2025 with GODIAG GT109 ENET/DOIP cable.
I tried all possible IP addresses and ports, disabled the firewall, but could not get any data from the car.
If I test this on a 2022 C-Class W206 with the same setup and configuration, everything works perfectly.
So I think it's the W213 that's blocking traffic on the LAN (network data shows a few kilobytes of data sent, but zero data received)!

Has anyone had any success using XPT over DOIP to diagnose 2022 and newer E-Class models?
And if so, with what Xentry software/hardware?
 
  • Like [+1]
Reactions:nazgra
Solution
P
  • P
    Given by PeteM123
After trying again with Openport 2.0 and the Tactrix adapter I was able to connect again and do a short test.
Therefore, the information that the MBUX 2022+ W213 model is NOT ENET/DOIP is correct.
Thanks wojciech300.

However, not everything is good. I often lose connection.
It seems to be happening completely randomly and not related to the 12V level like it does when you plug in a charger.
This may be related to the XPT version 06.2024 that I installed some time ago.
I think we should be more aware of how the manufacturer designed them and not trust that everything we find on the internet works!
Something like this for older people in the know!

1748378314682
 
Upvote0 Downvote
Status
Not open for further replies.
Back
Top Bottom