Here are my current WORKING slave files that allow the system to work both with CBF and SMR-D files.
Installation Steps:
0) Install VX Manager and make sure that under the drivers tab you have fully installed both Passthru and Benz C6.
Attached you will find contents of both required files.
1) Place slave.ini file here: "C:\Program Files (x86)\Softing\Diagnostic Tool Set 8\8.16\Interfaces\DCDI30\slave.ini".
2) Place DTSConfig.xml file here: "C:\ProgramData\Softing\Diagnostic Tool Set\8.16\Daimler".
When you start DTS Monaco it should now appear in your interfaces under administrate projects.
Installation Steps:
0) Install VX Manager and make sure that under the drivers tab you have fully installed both Passthru and Benz C6.
Attached you will find contents of both required files.
1) Place slave.ini file here: "C:\Program Files (x86)\Softing\Diagnostic Tool Set 8\8.16\Interfaces\DCDI30\slave.ini".
2) Place DTSConfig.xml file here: "C:\ProgramData\Softing\Diagnostic Tool Set\8.16\Daimler".
When you start DTS Monaco it should now appear in your interfaces under administrate projects.
Last edited:
