localmode
New member
- Joined
- 29.01.2024
- Messages
- 13
- Reaction score
- 7
I have a W212 facelift, I need to change the headlights to pre-facelift ones.
I have a problem, two lines for low beam are always 12V. 15M pin 8. 14M pin 2.
I need to code these lines so that they can be turned on and off with a switch.
How can I make this option? With DTS Monaco or Vediamo.
SAMF_172, CGW231.
I have a problem, two lines for low beam are always 12V. 15M pin 8. 14M pin 2.
I need to code these lines so that they can be turned on and off with a switch.
How can I make this option? With DTS Monaco or Vediamo.
SAMF_172, CGW231.